Painting the walls is a great way to give a room a new look, but it’s important to be prepared for the paint to dry smoothly and last. A properly prepped wall guarantees that the fresh paint conceals blemishes and adheres nicely. Make sure your walls are prepared for a new coat of paint by following this step-by-step tutorial.
Step 1: Make The Space Clear And Shield Surfaces
It’s crucial to empty the space or relocate furniture to the middle of the room before beginning, then cover it with old blankets or plastic sheets. Cover your flooring with a painter’s tarp or drop cloth to protect them. To cover surfaces you don’t want to paint, like baseboards, window frames, and door trim, use painter’s tape. To further reduce the likelihood of paint splashes, remove cover plates from electrical outlets and switch plates. If you don’t intend to paint the whole house, you can also have 1 room painting services at low price.
Step 2: Make The Walls Tidy
Dust, filth, and even grease can build up on walls over time and interfere with the effective adhesion of fresh paint. Wash your walls with a mild cleanser mixed with water to make sure the surface is clean. Use a water-degreaser solution on greasy areas, particularly in kitchens. Use a sponge to clean the walls, then rinse with fresh water. Proceed to the next step only once the walls have dried completely.
Step 3: Mend Any Damaged Sections
Be sure there are no holes, cracks, or dents in the walls that can compromise the quality of your paint work. Fill up any little cracks or holes with joint compound or spackle. Larger holes might require a wall patch kit. Use a putty knife to spread the spackle or compound and level it out so it blends in with the wall above. Sand the spackle down to a smooth surface after it has dried. Before painting, it’s also essential to repair any damaged drywall or loose plaster.
Step 4: Sand the Walls
Sanding is an essential procedure that smooth out imperfections and improves the adhesion of the fresh paint. Lightly sand the entire wall surface using fine-grit sandpaper (180–220 grit), paying special attention to the places where spackle or patching compound was applied. Sanding produces a smooth surface and helps get rid of any old paint lumps and uneven texture. Use a moist towel or a tack cloth to wipe the walls clean after sanding. Hire a professional like https://www.handymansingapore.net/painting-services/ because they have all the equipment and knowledge required for the job.
Step 5: Prime the Walls
Priming is an important step, particularly when painting over bright or dark colors, freshly repaired sections, or walls with stains. The fresh paint color will apply smoothly and evenly if the primer is of high quality. Not only does it make the surface more uniform, but it also helps disguise flaws. Large areas should be primed with a roller, and corners and edges should be painted with a brush. According to the manufacturer’s instructions, let the primer dry fully.
Step 7: Caulk Gaps and Seams
Caulk the spaces around windows and doors, baseboards, crown molding, and between walls to provide a polished appearance. This step keeps cracks from appearing through the fresh paint and helps to produce a smooth transition between the surfaces. Fill the spaces with paintable caulk using a caulking gun, and then smooth it with a moist finger or a finishing tool for caulk.
Step 8: Clear the Debris and Dust
Give the walls one more wipe down to get rid of any last bits of dust or debris before you paint. Make sure your walls are perfectly clean and prepared for painting by using a moist cloth or a vacuum with a brush attachment. Don’t miss this last cleaning because dust particles can harm the smoothness of your paint finish.
